Call for Price
Automatic 2-Needle Belt-Loop Attaching Machine
The Juki MOL-254 machine time is 1.2 seconds per belt-loop, which ensures increased productivity. The feed mechanism incorporates a computer-controlled X-Y method to allow the operator to change the number of stitches and sewing sizes.
Description
Automatic 2-Needle Belt-Loop Attaching Machine
The Juki MOL-254 machine time is 1.2 seconds per belt-loop (with 28 stitches).
The new Juki MOL-254 machine head specifically developed for belt-loop attaching machines runs at a maximum sewing speed of 2,500rpm and is equipped with a direct-drive system that improves start up performance and shortens sewing time. The belt-loop feeding device is now provided with a halfway standby capability for subsequent belt-loops, and its faster belt-loop supply action shortens the time required for supplying belt-loops and helps speed up the machine time to 1.2 seconds per belt-loop (with 28 stitches).
With the improved consistency in belt-loop supply action and re-try capability, the machine down time is substantially reduced.
Belt-loops are fed out by the conventional gear-roller feeding mechanism and also drawn out by the new drawing mechanism on the clamp device. Supported by these two mechanisms, the folding fork catches “curled” or “creased” belt-loops every time and supplies them to the head. In addition, the sensor of the clamp device detects the presence/absence of belt-loops. If it detects a faulty belt-loop feed, the clamp device automatically repeats the clamping action. Since the operator doesn’t have to operate the set-back switch, less time is lost.
Technical Information
| Model Number | Juki MOL-254 |
|---|---|
| Machine head | Computer-controlled, 2-needle, lockstitch bartacking machine |
| Max. sewing speed | 2,500rpm |
| Thread take up | Link type |
| Needle bar stroke | 45.7mm |
| Thread | Spun thread, cotton thread #50#30, B33B46, Nm=120/360/3 |
| Needle (at the time of delivery) | DP17 (#21) #19#21 |
| Hook | Horizontal-axis 1.8 fold-capacity shuttle hook |
| Lift of the presser foot | 21mm |
| Number of stitches | 28, 36, 42 (selectable on the operating panel) |
| Needle gauge | 4070mm (1-37/64″2-3/4″) |
| Bartacking length | 722mm (9/32″55/64″)adjustable in increments of 0.1mm |
| Bartacking width | 13.2mm (3/64″1/8″)adjustable in increments of 0.1mm |
| Number of pieces of bartacking data that can be stored in memory |
9 (99 patterns if optional ROM is added) |
| Belt-loop width | 920mm (23/64″25/32″) |
| Finished length of belt-loop | 4878mm (1-57/64″3-5/64″) |
| Machine time | 1.2 sec./belt-loop (28 stitch) |
| Positioning of the front hook | Driven by motor (the distance between the hook can be established in increments of 0.01mm) |
| Bobbin winder | Electric type (provided as standard) |
| Lubrication | Centralized oil wick lubrication (machine head) |
| Lubricating oil | JUKI New Defrix Oil No.2 (equivalent to ISO VG32) |
| Power requirement and power consumption |
Single-/3-phase, 350VA |
| Compressed air and air consumption | 0.5MPa (5kgf/cm2), 32NR/min |
| Total weight | 230kg |
| Dimensions | 1,200mm (W)800mm (D)1,350mm (H: in its lowest end) |
| Height of the top surface of the throat plate as from the floor surface |
9201,250mm (provided with the adjustable stand capability) |
